DerAnfänger
06.05.2009, 19:25
Mein Problem ist das ich beim Versuch Kismet zu starten diese Fehlermeldung bekomme:
Server options: none
Client options: none
Starting server...
Waiting for server to start before starting UI...
Suid priv-dropping disabled. This may not be secure.
No specific sources given to be enabled, all will be enabled.
Enabling channel hopping.
Enabling channel splitting.
Source 0 (ath5k): Enabling monitor mode for madwifi_ag source interface ath0 channel 6...
WARNING: ath0 appears to not accept the Madwifi-NG controls. Will attempt to configure it as a standard Madwifi-old interface. If you are using madwifi-ng, be sure to set the source interface to the wifiX control interface, NOT athX
FATAL: 'get_mode' does not return integer parameters.
Meine kismet.conf :
# Kismet config file
# Most of the "static" configs have been moved to here -- the command line
# config was getting way too crowded and cryptic. We want functionality,
# not continually reading --help!
# Version of Kismet config
version=2005.06.R1
# Name of server (Purely for organizational purposes)
servername=Kismet
# User to setid to (should be your normal user)
#suiduser=Typ
# Sources are defined as:
# source=sourcetype,interface,name[,initialchannel]
# Source types and required drivers are listed in the README under the
# CAPTURE SOURCES section.
# The initial channel is optional, if hopping is not enabled it can be used
# to set the channel the interface listens on.
# YOU MUST CHANGE THIS TO BE THE SOURCE YOU WANT TO USE
source=madwifi_ag,ath0,ath5k
# Comma-separated list of sources to enable. This is only needed if you defined
# multiple sources and only want to enable some of them. By default, all defined
# sources are enabled.
# For example:
# enablesources=prismsource,ciscosource
Und noch hier iwpriv :
lo no private ioctls.
eth0 no private ioctls.
wifi0 no private ioctls.
ath0 Available private ioctls :
setoptie (8BE8) : set 256 byte & get 0
getoptie (8BE9) : set 0 & get 256 byte
setkey (8BE2) : set 60 byte & get 0
delkey (8BE4) : set 7 byte & get 0
setmlme (8BE6) : set 10 byte & get 0
addmac (8BEA) : set 1 addr & get 0
delmac (8BEC) : set 1 addr & get 0
setchanlist (8BEE) : set 32 byte & get 0
getchanlist (8BED) : set 0 & get 32 byte
getchaninfo (8BE7) : set 0 & get 2044 byte
mode (8BF1) : set 6 char & get 0
get_mode (8BF2) : set 0 & get 6 char
setwmmparams (8BE3) : set 4 int & get 0
getwmmparams (8BE5) : set 3 int & get 1 int
cwmin (0001) : set 3 int & get 0
get_cwmin (0001) : set 2 int & get 1 int
cwmax (0002) : set 3 int & get 0
get_cwmax (0002) : set 2 int & get 1 int
aifs (0003) : set 3 int & get 0
get_aifs (0003) : set 2 int & get 1 int
txoplimit (0004) : set 3 int & get 0
get_txoplimit (0004) : set 2 int & get 1 int
acm (0005) : set 3 int & get 0
get_acm (0005) : set 2 int & get 1 int
noackpolicy (0006) : set 3 int & get 0
get_noackpolicy (0006) : set 2 int & get 1 int
setparam (8BE0) : set 2 int & get 0
getparam (8BE1) : set 1 int & get 1 int
authmode (0003) : set 1 int & get 0
get_authmode (0003) : set 0 & get 1 int
protmode (0004) : set 1 int & get 0
get_protmode (0004) : set 0 & get 1 int
mcastcipher (0005) : set 1 int & get 0
get_mcastcipher (0005) : set 0 & get 1 int
mcastkeylen (0006) : set 1 int & get 0
get_mcastkeylen (0006) : set 0 & get 1 int
ucastciphers (0007) : set 1 int & get 0
get_uciphers (0007) : set 0 & get 1 int
ucastcipher (0008) : set 1 int & get 0
get_ucastcipher (0008) : set 0 & get 1 int
ucastkeylen (0009) : set 1 int & get 0
get_ucastkeylen (0009) : set 0 & get 1 int
keymgtalgs (0015) : set 1 int & get 0
get_keymgtalgs (0015) : set 0 & get 1 int
rsncaps (0016) : set 1 int & get 0
get_rsncaps (0016) : set 0 & get 1 int
roaming (000C) : set 1 int & get 0
get_roaming (000C) : set 0 & get 1 int
privacy (000D) : set 1 int & get 0
get_privacy (000D) : set 0 & get 1 int
countermeasures (000E) : set 1 int & get 0
get_countermeas (000E) : set 0 & get 1 int
dropunencrypted (000F) : set 1 int & get 0
get_dropunencry (000F) : set 0 & get 1 int
wpa (000A) : set 1 int & get 0
get_wpa (000A) : set 0 & get 1 int
driver_caps (0010) : set 1 int & get 0
get_driver_caps (0010) : set 0 & get 1 int
maccmd (0011) : set 1 int & get 0
wmm (0012) : set 1 int & get 0
get_wmm (0012) : set 0 & get 1 int
hide_ssid (0013) : set 1 int & get 0
get_hide_ssid (0013) : set 0 & get 1 int
ap_bridge (0014) : set 1 int & get 0
get_ap_bridge (0014) : set 0 & get 1 int
inact (0017) : set 1 int & get 0
get_inact (0017) : set 0 & get 1 int
inact_auth (0018) : set 1 int & get 0
get_inact_auth (0018) : set 0 & get 1 int
inact_init (0019) : set 1 int & get 0
get_inact_init (0019) : set 0 & get 1 int
abolt (001A) : set 1 int & get 0
get_abolt (001A) : set 0 & get 1 int
dtim_period (001C) : set 1 int & get 0
get_dtim_period (001C) : set 0 & get 1 int
bintval (001D) : set 1 int & get 0
get_bintval (001D) : set 0 & get 1 int
doth (001E) : set 1 int & get 0
get_doth (001E) : set 0 & get 1 int
doth_pwrtgt (001F) : set 1 int & get 0
get_doth_pwrtgt (001F) : set 0 & get 1 int
doth_reassoc (0020) : set 1 int & get 0
compression (0021) : set 1 int & get 0
get_compression (0021) : set 0 & get 1 int
ff (0022) : set 1 int & get 0
get_ff (0022) : set 0 & get 1 int
turbo (0001) : set 1 int & get 0
get_turbo (0001) : set 0 & get 1 int
xr (0023) : set 1 int & get 0
get_xr (0023) : set 0 & get 1 int
burst (0024) : set 1 int & get 0
get_burst (0024) : set 0 & get 1 int
doth_chanswitch (8BF0) : set 2 int & get 0
pureg (0025) : set 1 int & get 0
get_pureg (0025) : set 0 & get 1 int
ar (0026) : set 1 int & get 0
get_ar (0026) : set 0 & get 1 int
wds (0027) : set 1 int & get 0
get_wds (0027) : set 0 & get 1 int
bgscan (0028) : set 1 int & get 0
get_bgscan (0028) : set 0 & get 1 int
bgscanidle (0029) : set 1 int & get 0
get_bgscanidle (0029) : set 0 & get 1 int
bgscanintvl (002A) : set 1 int & get 0
get_bgscanintvl (002A) : set 0 & get 1 int
mcast_rate (002B) : set 1 int & get 0
get_mcast_rate (002B) : set 0 & get 1 int
coverageclass (002C) : set 1 int & get 0
get_coveragecls (002C) : set 0 & get 1 int
countryie (002D) : set 1 int & get 0
get_countryie (002D) : set 0 & get 1 int
scanvalid (002E) : set 1 int & get 0
get_scanvalid (002E) : set 0 & get 1 int
regclass (003B) : set 1 int & get 0
get_regclass (003B) : set 0 & get 1 int
rssi11a (002F) : set 1 int & get 0
get_rssi11a (002F) : set 0 & get 1 int
rssi11b (0030) : set 1 int & get 0
get_rssi11b (0030) : set 0 & get 1 int
rssi11g (0031) : set 1 int & get 0
get_rssi11g (0031) : set 0 & get 1 int
rate11a (0032) : set 1 int & get 0
get_rate11a (0032) : set 0 & get 1 int
rate11b (0033) : set 1 int & get 0
get_rate11b (0033) : set 0 & get 1 int
rate11g (0034) : set 1 int & get 0
get_rate11g (0034) : set 0 & get 1 int
uapsd (0035) : set 1 int & get 0
get_uapsd (0035) : set 0 & get 1 int
sleep (0036) : set 1 int & get 0
get_sleep (0036) : set 0 & get 1 int
qosnull (0037) : set 1 int & get 0
pspoll (0038) : set 1 int & get 0
eospdrop (0039) : set 1 int & get 0
get_eospdrop (0039) : set 0 & get 1 int
markdfs (003A) : set 1 int & get 0
get_markdfs (003A) : set 0 & get 1 int
chanbw (003C) : set 1 int & get 0
get_chanbw (003C) : set 0 & get 1 int
shpreamble (003E) : set 1 int & get 0
get_shpreamble (003E) : set 0 & get 1 int
blockdfschan (003F) : set 1 int & get 0
setiebuf (8BF4) : set 1024 byte & get 0
getiebuf (8BF3) : set 0 & get 1024 byte
setfilter (8BF6) : set 4 byte & get 0
radio (0040) : set 1 int & get 0
get_radio (0040) : set 0 & get 1 int
Ich hoffe ihr könnt mit diesen Informationen was anfangen und eine Lösung finden.
Server options: none
Client options: none
Starting server...
Waiting for server to start before starting UI...
Suid priv-dropping disabled. This may not be secure.
No specific sources given to be enabled, all will be enabled.
Enabling channel hopping.
Enabling channel splitting.
Source 0 (ath5k): Enabling monitor mode for madwifi_ag source interface ath0 channel 6...
WARNING: ath0 appears to not accept the Madwifi-NG controls. Will attempt to configure it as a standard Madwifi-old interface. If you are using madwifi-ng, be sure to set the source interface to the wifiX control interface, NOT athX
FATAL: 'get_mode' does not return integer parameters.
Meine kismet.conf :
# Kismet config file
# Most of the "static" configs have been moved to here -- the command line
# config was getting way too crowded and cryptic. We want functionality,
# not continually reading --help!
# Version of Kismet config
version=2005.06.R1
# Name of server (Purely for organizational purposes)
servername=Kismet
# User to setid to (should be your normal user)
#suiduser=Typ
# Sources are defined as:
# source=sourcetype,interface,name[,initialchannel]
# Source types and required drivers are listed in the README under the
# CAPTURE SOURCES section.
# The initial channel is optional, if hopping is not enabled it can be used
# to set the channel the interface listens on.
# YOU MUST CHANGE THIS TO BE THE SOURCE YOU WANT TO USE
source=madwifi_ag,ath0,ath5k
# Comma-separated list of sources to enable. This is only needed if you defined
# multiple sources and only want to enable some of them. By default, all defined
# sources are enabled.
# For example:
# enablesources=prismsource,ciscosource
Und noch hier iwpriv :
lo no private ioctls.
eth0 no private ioctls.
wifi0 no private ioctls.
ath0 Available private ioctls :
setoptie (8BE8) : set 256 byte & get 0
getoptie (8BE9) : set 0 & get 256 byte
setkey (8BE2) : set 60 byte & get 0
delkey (8BE4) : set 7 byte & get 0
setmlme (8BE6) : set 10 byte & get 0
addmac (8BEA) : set 1 addr & get 0
delmac (8BEC) : set 1 addr & get 0
setchanlist (8BEE) : set 32 byte & get 0
getchanlist (8BED) : set 0 & get 32 byte
getchaninfo (8BE7) : set 0 & get 2044 byte
mode (8BF1) : set 6 char & get 0
get_mode (8BF2) : set 0 & get 6 char
setwmmparams (8BE3) : set 4 int & get 0
getwmmparams (8BE5) : set 3 int & get 1 int
cwmin (0001) : set 3 int & get 0
get_cwmin (0001) : set 2 int & get 1 int
cwmax (0002) : set 3 int & get 0
get_cwmax (0002) : set 2 int & get 1 int
aifs (0003) : set 3 int & get 0
get_aifs (0003) : set 2 int & get 1 int
txoplimit (0004) : set 3 int & get 0
get_txoplimit (0004) : set 2 int & get 1 int
acm (0005) : set 3 int & get 0
get_acm (0005) : set 2 int & get 1 int
noackpolicy (0006) : set 3 int & get 0
get_noackpolicy (0006) : set 2 int & get 1 int
setparam (8BE0) : set 2 int & get 0
getparam (8BE1) : set 1 int & get 1 int
authmode (0003) : set 1 int & get 0
get_authmode (0003) : set 0 & get 1 int
protmode (0004) : set 1 int & get 0
get_protmode (0004) : set 0 & get 1 int
mcastcipher (0005) : set 1 int & get 0
get_mcastcipher (0005) : set 0 & get 1 int
mcastkeylen (0006) : set 1 int & get 0
get_mcastkeylen (0006) : set 0 & get 1 int
ucastciphers (0007) : set 1 int & get 0
get_uciphers (0007) : set 0 & get 1 int
ucastcipher (0008) : set 1 int & get 0
get_ucastcipher (0008) : set 0 & get 1 int
ucastkeylen (0009) : set 1 int & get 0
get_ucastkeylen (0009) : set 0 & get 1 int
keymgtalgs (0015) : set 1 int & get 0
get_keymgtalgs (0015) : set 0 & get 1 int
rsncaps (0016) : set 1 int & get 0
get_rsncaps (0016) : set 0 & get 1 int
roaming (000C) : set 1 int & get 0
get_roaming (000C) : set 0 & get 1 int
privacy (000D) : set 1 int & get 0
get_privacy (000D) : set 0 & get 1 int
countermeasures (000E) : set 1 int & get 0
get_countermeas (000E) : set 0 & get 1 int
dropunencrypted (000F) : set 1 int & get 0
get_dropunencry (000F) : set 0 & get 1 int
wpa (000A) : set 1 int & get 0
get_wpa (000A) : set 0 & get 1 int
driver_caps (0010) : set 1 int & get 0
get_driver_caps (0010) : set 0 & get 1 int
maccmd (0011) : set 1 int & get 0
wmm (0012) : set 1 int & get 0
get_wmm (0012) : set 0 & get 1 int
hide_ssid (0013) : set 1 int & get 0
get_hide_ssid (0013) : set 0 & get 1 int
ap_bridge (0014) : set 1 int & get 0
get_ap_bridge (0014) : set 0 & get 1 int
inact (0017) : set 1 int & get 0
get_inact (0017) : set 0 & get 1 int
inact_auth (0018) : set 1 int & get 0
get_inact_auth (0018) : set 0 & get 1 int
inact_init (0019) : set 1 int & get 0
get_inact_init (0019) : set 0 & get 1 int
abolt (001A) : set 1 int & get 0
get_abolt (001A) : set 0 & get 1 int
dtim_period (001C) : set 1 int & get 0
get_dtim_period (001C) : set 0 & get 1 int
bintval (001D) : set 1 int & get 0
get_bintval (001D) : set 0 & get 1 int
doth (001E) : set 1 int & get 0
get_doth (001E) : set 0 & get 1 int
doth_pwrtgt (001F) : set 1 int & get 0
get_doth_pwrtgt (001F) : set 0 & get 1 int
doth_reassoc (0020) : set 1 int & get 0
compression (0021) : set 1 int & get 0
get_compression (0021) : set 0 & get 1 int
ff (0022) : set 1 int & get 0
get_ff (0022) : set 0 & get 1 int
turbo (0001) : set 1 int & get 0
get_turbo (0001) : set 0 & get 1 int
xr (0023) : set 1 int & get 0
get_xr (0023) : set 0 & get 1 int
burst (0024) : set 1 int & get 0
get_burst (0024) : set 0 & get 1 int
doth_chanswitch (8BF0) : set 2 int & get 0
pureg (0025) : set 1 int & get 0
get_pureg (0025) : set 0 & get 1 int
ar (0026) : set 1 int & get 0
get_ar (0026) : set 0 & get 1 int
wds (0027) : set 1 int & get 0
get_wds (0027) : set 0 & get 1 int
bgscan (0028) : set 1 int & get 0
get_bgscan (0028) : set 0 & get 1 int
bgscanidle (0029) : set 1 int & get 0
get_bgscanidle (0029) : set 0 & get 1 int
bgscanintvl (002A) : set 1 int & get 0
get_bgscanintvl (002A) : set 0 & get 1 int
mcast_rate (002B) : set 1 int & get 0
get_mcast_rate (002B) : set 0 & get 1 int
coverageclass (002C) : set 1 int & get 0
get_coveragecls (002C) : set 0 & get 1 int
countryie (002D) : set 1 int & get 0
get_countryie (002D) : set 0 & get 1 int
scanvalid (002E) : set 1 int & get 0
get_scanvalid (002E) : set 0 & get 1 int
regclass (003B) : set 1 int & get 0
get_regclass (003B) : set 0 & get 1 int
rssi11a (002F) : set 1 int & get 0
get_rssi11a (002F) : set 0 & get 1 int
rssi11b (0030) : set 1 int & get 0
get_rssi11b (0030) : set 0 & get 1 int
rssi11g (0031) : set 1 int & get 0
get_rssi11g (0031) : set 0 & get 1 int
rate11a (0032) : set 1 int & get 0
get_rate11a (0032) : set 0 & get 1 int
rate11b (0033) : set 1 int & get 0
get_rate11b (0033) : set 0 & get 1 int
rate11g (0034) : set 1 int & get 0
get_rate11g (0034) : set 0 & get 1 int
uapsd (0035) : set 1 int & get 0
get_uapsd (0035) : set 0 & get 1 int
sleep (0036) : set 1 int & get 0
get_sleep (0036) : set 0 & get 1 int
qosnull (0037) : set 1 int & get 0
pspoll (0038) : set 1 int & get 0
eospdrop (0039) : set 1 int & get 0
get_eospdrop (0039) : set 0 & get 1 int
markdfs (003A) : set 1 int & get 0
get_markdfs (003A) : set 0 & get 1 int
chanbw (003C) : set 1 int & get 0
get_chanbw (003C) : set 0 & get 1 int
shpreamble (003E) : set 1 int & get 0
get_shpreamble (003E) : set 0 & get 1 int
blockdfschan (003F) : set 1 int & get 0
setiebuf (8BF4) : set 1024 byte & get 0
getiebuf (8BF3) : set 0 & get 1024 byte
setfilter (8BF6) : set 4 byte & get 0
radio (0040) : set 1 int & get 0
get_radio (0040) : set 0 & get 1 int
Ich hoffe ihr könnt mit diesen Informationen was anfangen und eine Lösung finden.