Suse Linux 11.1 64 Bit Version und der Fritz Wlan USB Stick
Hallo,
ich habe vor einigen Tagen mir auf die Platte Suse Linux 11.1 64Bit installiert.
Dabei ist mir aufgefallen das mein Fritz Wlan USB Stick nicht funktioniert.
Ich habe viele Foren durchforstet und irgendwie gingen die ganzen Tutotials bei mir nicht
wirklich. habe es wie folgt mit dem Ndiswrapper versucht..
Treiber CD eingelegt und ganze Dateien und Verzeichnisse in /home/user/ koppiert
danach habe ich das Terminal geöffnet und folgendes gemacht
su um root zu werden
danach in das verzeichniss gewechselt wo sich die fwlan.INF datei befindet
danach ndiswrapper -i fwlan.inf
danach ndiswrapper -l , dann kommt folgendes:
fwlan : driver installed
device (057C:6201) present (alternate driver: acx)
danach habe ich in die shell folgendes eingegeben
modprobe ndiswrapper
und dann ndiswrapper .m
nun wenn ich aber iwconfig eingebe kommt folgendes:
lo no wireless extensions.
eth0 no wireless extensions.
was soll ich nun machen wenn dmesg eingebe steht da folgendes dran:
Code:
Code:
[<ffffffffa00ccff8>] hub_thread+0x2e/0x1a0 [usbcore]
[<ffffffff8025434d>] kthread+0x47/0x73
[<ffffffff8020d7b9>] child_rip+0xa/0x11
wlan%d: acx_s_init_packet_templates() FAILED
acx: init_mac() FAILED
acx_usb: probe of 4-7:1.0 failed with error 1
usb 4-7: New USB device found, idVendor=057c, idProduct=6201
usb 4-7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb 4-7: Product: WLAN USB Device
usb 4-7: Manufacturer: AVM GmbH
usb 4-7: SerialNumber: 001C4AF955DD
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
linux-4865:/home/nicole # clear
linux-4865:/home/nicole # dmesg
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.27.7-9-default (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-12-04 18:10:04 +0100
Command line: root=/dev/disk/by-id/ata-WDC_WD6400AAKS-65A7B0_WD-WCASY0272862-part7 resume=/dev/disk/by-id/ata-WDC_WD6400AAKS-65A7B0_WD-WCASY0272862-part6 splash=silent vga=0x345
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009b000 (usable)
BIOS-e820: 000000000009b000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
BIOS-e820: 00000000cffb0000 - 00000000cffbe000 (ACPI data)
BIOS-e820: 00000000cffbe000 - 00000000cfff0000 (ACPI NVS)
BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0x130000 max_arch_pfn = 0x3ffffffff
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xcffb0 max_arch_pfn = 0x3ffffffff
init_memory_mapping
0000000000 - 00cfe00000 page 2M
00cfe00000 - 00cffb0000 page 4k
kernel direct mapping tables up to cffb0000 @ 10000-16000
last_map_addr: cffb0000 end: cffb0000
init_memory_mapping
0100000000 - 0130000000 page 2M
kernel direct mapping tables up to 130000000 @ 14000-1a000
last_map_addr: 130000000 end: 130000000
RAMDISK: 37a53000 - 37fefcc7
ACPI: RSDP 000FC430, 0014 (r0 HPQOEM)
ACPI: RSDT CFFB0000, 0044 (r1 HPQOEM SLIC-CPC 20080328 MSFT 97)
ACPI: FACP CFFB0200, 0084 (r2 HPQOEM SLIC-CPC 20080328 MSFT 97)
ACPI: DSDT CFFB0440, 4E91 (r1 HPQOEM SLIC-CPC 0 INTL 20051117)
ACPI: FACS CFFBE000, 0040
ACPI: APIC CFFB0390, 006C (r1 HPQOEM SLIC-CPC 20080328 MSFT 97)
ACPI: MCFG CFFB0400, 003C (r1 HPQOEM SLIC-CPC 20080328 MSFT 97)
ACPI: OEMB CFFBE040, 0072 (r1 HPQOEM SLIC-CPC 20080328 MSFT 97)
ACPI: HPET CFFB52E0, 0038 (r1 HPQOEM SLIC-CPC 20080328 MSFT 97)
ACPI: GSCI CFFBE0C0, 2024 (r1 HPQOEM SLIC-CPC 20080328 MSFT 97)
ACPI: SLIC CFFC00F0, 0176 (r1 HPQOEM SLIC-CPC 1 MSFT 1)
ACPI: SSDT CFFC14B0, 082F (r1 HPQOEM SLIC-CPC 12 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000130000000
Bootmem setup node 0 0000000000000000-0000000130000000
NODE_DATA [0000000000015000 - 000000000002cfff]
bootmap [000000000002d000 - 0000000000052fff] pages 26
(7 early reservations) ==> bootmem [0000000000 - 0130000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 0000bf27b8] TEXT DATA BSS ==> [0000200000 - 0000bf27b8]
#3 [0037a53000 - 0037fefcc7] RAMDISK ==> [0037a53000 - 0037fefcc7]
#4 [000009b000 - 0000100000] BIOS reserved ==> [000009b000 - 0000100000]
#5 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
#6 [0000014000 - 0000015000] PGTABLE ==> [0000014000 - 0000015000]
found SMP MP-table at [ffff8800000ff780] 000ff780
[ffffe20000000000-ffffe20004bfffff] PMD -> [ffff880028200000-ffff88002c1fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00130000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009b
0: 0x00000100 -> 0x000cffb0
0: 0x00100000 -> 0x00130000
On node 0 totalpages: 1048379
DMA zone: 1258 pages, LIFO batch:0
DMA32 zone: 831472 pages, LIFO batch:31
Normal zone: 193536 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: HPET id: 0x8086a301 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
PM: Registered nosave memory: 00000000cffb0000 - 00000000cffbe000
PM: Registered nosave memory: 00000000cffbe000 - 00000000cfff0000
PM: Registered nosave memory: 00000000cfff0000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
Allocating PCI resources starting at d4000000 (gap: d0000000:2ee00000)
PERCPU: Allocating 62240 bytes of per cpu data
NR_CPUS: 512, nr_cpu_ids: 4, nr_node_ids 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1026266
Policy zone: Normal
Kernel command line: root=/dev/disk/by-id/ata-WDC_WD6400AAKS-65A7B0_WD-WCASY0272862-part7 resume=/dev/disk/by-id/ata-WDC_WD6400AAKS-65A7B0_WD-WCASY0272862-part6 splash=silent vga=0x345
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PMTIMER calibration value
Detected 2399.909 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x20000000 - 0x24000000
Memory: 4045516k/4980736k available (2731k kernel code, 148000k reserved, 2620k data, 1472k init)
CPA: page pool initialized 1 of 1 pages preallocated
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.81 BogoMIPS (lpj=9599636)
kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
Security Framework initialized
SELinux: Disabled at boot.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20080609
ACPI: Checking initramfs for custom DSDT
Parsing all Control Methods:
Table [DSDT](id 0001) - 738 Objects with 63 Devices 192 Methods 24 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 41 Objects with 0 Devices 8 Methods 1 Regions
tbxface-0596 [00] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
Using local APIC timer interrupts.
APIC timer calibration result 16666066
Detected 16.666 MHz APIC timer.
Booting processor 1/1 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4637.88 BogoMIPS (lpj=9275773)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2/2 ip 6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 4799.89 BogoMIPS (lpj=9599791)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 2/2 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU2: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
checking TSC synchronization [CPU#1 -> CPU#2]: passed.
Booting processor 3/3 ip 6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 4825.98 BogoMIPS (lpj=9651974)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 3/3 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU3: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
CPU3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
checking TSC synchronization [CPU#2 -> CPU#3]: passed.
Brought up 4 CPUs
Total of 4 processors activated (19063.58 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
domain 1: span 0-3 level CPU
groups: 0-1 2-3
domain 2: span 0-3 level NODE
groups: 0-3
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
domain 1: span 0-3 level CPU
groups: 0-1 2-3
domain 2: span 0-3 level NODE
groups: 0-3
CPU2 attaching sched-domain:
domain 0: span 2-3 level MC
groups: 2 3
domain 1: span 0-3 level CPU
groups: 2-3 0-1
domain 2: span 0-3 level NODE
groups: 0-3
CPU3 attaching sched-domain:
domain 0: span 2-3 level MC
groups: 3 2
domain 1: span 0-3 level CPU
groups: 2-3 0-1
domain 2: span 0-3 level NODE
groups: 0-3
net_namespace: 1936 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
evgpeblk-0957 [00] ev_create_gpe_block : GPE 00 to 3F [_GPE] 8 regs on int 0x9
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package initialization:....................................................................................................................................
Initialized 19/25 Regions 39/39 Fields 45/45 Buffers 29/30 Packages (788 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:
Executed 0 _INI methods requiring 0 _STA executions (examined 69 objects)
evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 11 Wake, Enabled 2 Runtime GPEs in this block
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
PCI: 0000:00:1a.0 reg 20 io port: [b400, b41f]
PCI: 0000:00:1a.1 reg 20 io port: [b480, b49f]
PCI: 0000:00:1a.7 reg 10 32bit mmio: [fe8fec00, fe8fefff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
PCI: 0000:00:1b.0 reg 10 64bit mmio: [fe8f4000, fe8f7fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
PCI: 0000:00:1d.0 reg 20 io port: [b800, b81f]
PCI: 0000:00:1d.1 reg 20 io port: [b880, b89f]
PCI: 0000:00:1d.2 reg 20 io port: [bc00, bc1f]
PCI: 0000:00:1d.3 reg 20 io port: [c000, c01f]
PCI: 0000:00:1d.7 reg 10 32bit mmio: [fe8ff800, fe8ffbff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
PCI: 0000:00:1f.2 reg 10 io port: [c880, c887]
PCI: 0000:00:1f.2 reg 14 io port: [c800, c803]
PCI: 0000:00:1f.2 reg 18 io port: [c480, c487]
PCI: 0000:00:1f.2 reg 1c io port: [c400, c403]
PCI: 0000:00:1f.2 reg 20 io port: [c080, c09f]
PCI: 0000:00:1f.2 reg 24 32bit mmio: [fe8ff000, fe8ff7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
PCI: 0000:00:1f.3 reg 10 64bit mmio: [fe8ffc00, fe8ffcff]
PCI: 0000:00:1f.3 reg 20 io port: [400, 41f]
PCI: 0000:04:00.0 reg 10 64bit mmio: [d0000000, dfffffff]
PCI: 0000:04:00.0 reg 18 64bit mmio: [feae0000, feaeffff]
PCI: 0000:04:00.0 reg 20 io port: [d000, d0ff]
PCI: 0000:04:00.0 reg 30 32bit mmio: [feac0000, feadffff]
pci 0000:04:00.0: supports D1
pci 0000:04:00.0: supports D2
PCI: 0000:04:00.1 reg 10 64bit mmio: [feafc000, feafffff]
pci 0000:04:00.1: supports D1
pci 0000:04:00.1: supports D2
PCI: bridge 0000:00:01.0 io port: [d000, dfff]
PCI: bridge 0000:00:01.0 32bit mmio: [fea00000, feafffff]
PCI: bridge 0000:00:01.0 64bit mmio pref: [d0000000, dfffffff]
PCI: 0000:02:00.0 reg 10 io port: [e800, e8ff]
PCI: 0000:02:00.0 reg 18 64bit mmio: [febff000, febfffff]
PCI: 0000:02:00.0 reg 20 64bit mmio: [fdff0000, fdffffff]
PCI: 0000:02:00.0 reg 30 32bit mmio: [febc0000, febdffff]
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: supports D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
PCI: bridge 0000:00:1c.2 io port: [e000, efff]
PCI: bridge 0000:00:1c.2 32bit mmio: [feb00000, febfffff]
PCI: bridge 0000:00:1c.2 64bit mmio pref: [fdf00000, fdffffff]
PCI: 0000:01:05.0 reg 10 32bit mmio: [fe9ff000, fe9fffff]
pci 0000:01:05.0: supports D1
pci 0000:01:05.0: supports D2
pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
pci 0000:01:05.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
PCI: bridge 0000:00:1e.0 32bit mmio: [fe900000, fe9fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 64-bit timers, 14318180 Hz
AppArmor: AppArmor Filesystem Enabled
ACPI: RTC can wake from S4
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 3
Switched to high resolution mode on CPU 1
system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
system 00:06: ioport range 0x4d0-0x4d1 has been reserved
system 00:06: ioport range 0x800-0x87f has been reserved
system 00:06: ioport range 0x480-0x4bf has been reserved
system 00:06: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:06: iomem range 0xfed20000-0xfed8ffff has been reserved
system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:0b: ioport range 0xa00-0xadf has been reserved
system 00:0d: iomem range 0xffc00000-0xffefffff has been reserved
system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0f: iomem range 0x0-0x9ffff could not be reserved
system 00:0f: iomem range 0xc0000-0xcffff has been reserved
system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
system 00:0f: iomem range 0x100000-0xcfffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:04
pci 0000:00:01.0: IO window: 0xd000-0xdfff
pci 0000:00:01.0: MEM window: 0xfea00000-0xfeafffff
pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.2: IO window: 0xe000-0xefff
pci 0000:00:1c.2: MEM window: 0xfeb00000-0xfebfffff
pci 0000:00:1c.2: PREFETCH window: 0x000000fdf00000-0x000000fdffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: 0xfe900000-0xfe9fffff
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 04 index 0 io port: [d000, dfff]
bus: 04 index 1 mmio: [fea00000, feafffff]
bus: 04 index 2 mmio: [d0000000, dfffffff]
bus: 04 index 3 mmio: [0, 0]
bus: 03 index 0 mmio: [0, 0]
bus: 03 index 1 mmio: [0, 0]
bus: 03 index 2 mmio: [0, 0]
bus: 03 index 3 mmio: [0, 0]
bus: 02 index 0 io port: [e000, efff]
bus: 02 index 1 mmio: [feb00000, febfffff]
bus: 02 index 2 mmio: [fdf00000, fdffffff]
bus: 02 index 3 mmio: [0, 0]
bus: 01 index 0 mmio: [0, 0]
bus: 01 index 1 mmio: [fe900000, fe9fffff]
bus: 01 index 2 mmio: [0, 0]
bus: 01 index 3 io port: [0, ffff]
bus: 01 index 4 mmio: [0, ffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 5747k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1230994010.836:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 1978
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:04:00.0: Boot video device
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:01.0: found MSI capability
pci_express 0000:00:01.0:pcie00: allocate port service
pci_express 0000:00:01.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.2: found MSI capability
pci_express 0000:00:1c.2:pcie00: allocate port service
pci_express 0000:00:1c.2:pcie02: allocate port service
pci_express 0000:00:1c.2:pcie03: allocate port service
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20011100000, using 11550k, total 16384k
vesafb: mode is 1400x1050x16, linelength=2816, pages=4
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 113987 bytes
bootsplash: ...found (1400x1050, 45904 bytes, v3).
Console: switching to colour frame buffer device 171x61
fb0: VESA VGA frame buffer device
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
Serial: 8250/16550 driver8 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
registered taskstats version 1
Freeing unused kernel memory: 1472k freed
Write protecting the kernel read-only data: 5024k
ACPI: SSDT CFFC0270, 0277 (r1 HPQOEM SLIC-CPC 11 INTL 20051117)
Parsing all Control Methods:
Table [SSDT](id 0068) - 6 Objects with 0 Devices 4 Methods 0 Regions
processor ACPI_CPU:00: registered as cooling_device0
ACPI: SSDT CFFC0700, 0277 (r1 HPQOEM SLIC-CPC 12 INTL 20051117)
Parsing all Control Methods:
Table [SSDT](id 006B) - 6 Objects with 0 Devices 4 Methods 0 Regions
processor ACPI_CPU:01: registered as cooling_device1
ACPI: SSDT CFFC0B90, 0277 (r1 HPQOEM SLIC-CPC 12 INTL 20051117)
Parsing all Control Methods:
Table [SSDT](id 006E) - 6 Objects with 0 Devices 4 Methods 0 Regions
processor ACPI_CPU:02: registered as cooling_device2
ACPI: SSDT CFFC1020, 0277 (r1 HPQOEM SLIC-CPC 12 INTL 20051117)
Parsing all Control Methods:
Table [SSDT](id 0071) - 6 Objects with 0 Devices 4 Methods 0 Regions
processor ACPI_CPU:03: registered as cooling_device3
ACPI: No dock devices found.
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfe8ff000 port 0xfe8ff100 irq 4348
ata2: SATA max UDMA/133 abar m2048@0xfe8ff000 port 0xfe8ff180 irq 4348
ata3: SATA max UDMA/133 abar m2048@0xfe8ff000 port 0xfe8ff200 irq 4348
ata4: SATA max UDMA/133 abar m2048@0xfe8ff000 port 0xfe8ff280 irq 4348
ata5: SATA max UDMA/133 abar m2048@0xfe8ff000 port 0xfe8ff300 irq 4348
ata6: SATA max UDMA/133 abar m2048@0xfe8ff000 port 0xfe8ff380 irq 4348
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD6400AAKS-65A7B0, 01.03B01, max UDMA/133
ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input1
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: TSSTcorp CDDVDW TS-H653Q, 0303, max UDMA/33, ATAPI AN
ata2.00: configured for UDMA/33
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA WDC WD6400AAKS-6 01.0 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-H653Q 0303 PQ: 0 ANSI: 5
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
udevd version 128 started
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe8fec00
USB Universal Host Controller Interface driver v3.0
sd 0:0:0:0: [sda] 1250263728 512-byte hardware sectors: (640GB/596GiB)
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 1250263728 512-byte hardware sectors: (640GB/596GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 < sda5 sda6 sda7<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
sda8 > sda2
usb usb1: Product: EHCI Host Controller
sd 0:0:0:0: [sda] Attached SCSI disk
usb usb1: Manufacturer: Linux 2.6.27.7-9-default ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b400
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27.7-9-default uhci_hcd
usb usb2: SerialNumber: 0000:00:1a.0
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b480
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27.7-9-default uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.1
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe8ff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 8 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.27.7-9-default ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.7
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b800
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 4-5: new high speed USB device using ehci_hcd and address 2
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.27.7-9-default uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b880
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 4-5: configuration #1 chosen from 1 choice
usb 4-5: New USB device found, idVendor=0bda, idProduct=0111
usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-5: Product: USB2.0-CRW
usb 4-5: Manufacturer: Generic
usb 4-5: SerialNumber: 20021111153705700
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.27.7-9-default uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bc00
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.27.7-9-default uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c000
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.27.7-9-default uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.3
PM: Starting manual resume from disk
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
udevd version 128 started
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
input: PC Speaker as /devices/platform/pcspkr/input/input3
iTCO_vendor_support: vendor-support=0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, hpet irqs
sr0: scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
vendor=8086 device=244e
ohci1394 0000:01:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[fe9ff000-fe9ff7ff] Max Packet=[1024] IR/IT contexts=[8/8]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
vendor=8086 device=2944
r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:02:00.0: setting latency timer to 64
eth0: RTL8168c/8111c at 0xffffc20000654000, 00:22:15:26:16:95, XID 3c2000c0 IRQ 4347
ACPI: Power Button (CM) [PWRB]
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
ALSA sound/pci/hda/hda_codec.c:3047: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
ALSA sound/pci/hda/hda_codec.c:3051: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3055: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3056: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3064: inputs: mic=0x18, fmic=0x19, line=0x1c, fline=0x0, cd=0x0, aux=0x0
HDA Intel 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:04:00.1: setting latency timer to 64
scsi 6:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sd 6:0:0:0: Attached scsi generic sg2 type 0
scsi 6:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
sd 6:0:0:1: [sdc] Attached SCSI removable disk
sd 6:0:0:1: Attached scsi generic sg3 type 0
scsi 6:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
sd 6:0:0:2: [sdd] Attached SCSI removable disk
sd 6:0:0:2: Attached scsi generic sg4 type 0
Adding 2104472k swap on /dev/sda6. Priority:-1 extents:1 across:2104472k
scsi 6:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
sd 6:0:0:3: [sde] Attached SCSI removable disk
sd 6:0:0:3: Attached scsi generic sg5 type 0
usb-storage: device scan complete
ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c000154d523]
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.9)
type=1505 audit(1230990423.466:2): operation="profile_load" name="/bin/ping" name2="default" pid=2032
type=1505 audit(1230990423.494:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=2033
type=1505 audit(1230990423.542:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=2034
type=1505 audit(1230990423.592:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=2035
type=1505 audit(1230990423.644:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=2036
type=1505 audit(1230990423.692:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=2059
type=1505 audit(1230990423.740:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=2065
type=1505 audit(1230990423.792:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=2067
type=1505 audit(1230990423.860:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=2089
type=1505 audit(1230990423.924:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=2125
r8169: eth0: link down
NET: Registered protocol family 17
mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU2 attaching NULL sched-domain.
CPU3 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
domain 1: span 0-3 level CPU
groups: 0-1 2-3
domain 2: span 0-3 level NODE
groups: 0-3
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
domain 1: span 0-3 level CPU
groups: 0-1 2-3
domain 2: span 0-3 level NODE
groups: 0-3
CPU2 attaching sched-domain:
domain 0: span 2-3 level MC
groups: 2 3
domain 1: span 0-3 level CPU
groups: 2-3 0-1
domain 2: span 0-3 level NODE
groups: 0-3
CPU3 attaching sched-domain:
domain 0: span 2-3 level MC
groups: 3 2
domain 1: span 0-3 level CPU
groups: 2-3 0-1
domain 2: span 0-3 level NODE
groups: 0-3
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
bootsplash: status on console 0 changed to on
usb 4-7: new high speed USB device using ehci_hcd and address 3
usb 4-7: configuration #1 chosen from 1 choice
scsi7 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb 4-7: New USB device found, idVendor=057c, idProduct=62ff
usb 4-7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb 4-7: Product: WLAN USB Device
usb 4-7: Manufacturer: AVM GmbH
usb 4-7: SerialNumber: 001C4AF955DD
scsi 7:0:0:0: CD-ROM FRITZ! WLAN selfinstall 1.00 PQ: 0 ANSI: 0 CCS
sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
sr 7:0:0:0: Attached scsi CD-ROM sr1
sr 7:0:0:0: Attached scsi generic sg6 type 5
usb-storage: device scan complete
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU2 attaching NULL sched-domain.
CPU3 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
domain 1: span 0-3 level CPU
groups: 0-1 2-3
domain 2: span 0-3 level NODE
groups: 0-3
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
domain 1: span 0-3 level CPU
groups: 0-1 2-3
domain 2: span 0-3 level NODE
groups: 0-3
CPU2 attaching sched-domain:
domain 0: span 2-3 level MC
groups: 2 3
domain 1: span 0-3 level CPU
groups: 2-3 0-1
domain 2: span 0-3 level NODE
groups: 0-3
CPU3 attaching sched-domain:
domain 0: span 2-3 level MC
groups: 3 2
domain 1: span 0-3 level CPU
groups: 2-3 0-1
domain 2: span 0-3 level NODE
groups: 0-3
usb 4-7: USB disconnect, address 3
scsi 7:0:0:0: rejecting I/O to dead device
scsi 7:0:0:0: rejecting I/O to dead device
scsi 7:0:0:0: rejecting I/O to dead device
usb 4-7: new high speed USB device using ehci_hcd and address 4
usb 4-7: configuration #1 chosen from 1 choice
usb 4-7: New USB device found, idVendor=057c, idProduct=6201
usb 4-7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb 4-7: Product: WLAN USB Device
usb 4-7: Manufacturer: AVM GmbH
usb 4-7: SerialNumber: 001C4AF955DD
acx: this driver is still EXPERIMENTAL
acx: reading README file and/or Craig's HOWTO is recommended, visit http://acx100.sf.net in case of further questions/discussion
acx: compiled to use 32bit I/O access. I/O timing issues might occur, such as non-working firmware upload. Report them
acx: running on a little-endian CPU
acx: PCI/VLYNQ module v0.3.37 initialized, waiting for cards to probe...
USB module v0.3.37 initialized, probing for devices...
wait for device ready
requesting firmware image 'tiacx111usbc1B'
firmware: requesting tiacx111usbc1B
acx: firmware image 'tiacx111usbc1B' was not provided. Check your hotplug scripts
acx: issue_cmd(cmd:ACX1xx_CMD_WAKE) FAILED
Pid: 4840, comm: modprobe Tainted: G 2.6.27.7-9-default #1
Call Trace:
[<ffffffff8020e42e>] show_trace_log_lvl+0x41/0x58
[<ffffffff804a1e97>] dump_stack+0x69/0x6f
[<ffffffffa0349de9>] acxusb_s_issue_cmd_timeo_debug+0x326/0x361 [acx]
[<ffffffffa034a2c6>] acxusb_e_probe+0x4a2/0x6ba [acx]
[<ffffffffa00d2c27>] usb_probe_interface+0x1a8/0x1df [usbcore]
[<ffffffff803eddc3>] really_probe+0xdd/0x1e5
[<ffffffff803edfb0>] __driver_attach+0x46/0x6d
[<ffffffff803ed555>] bus_for_each_dev+0x44/0x78
[<ffffffff803ece3b>] bus_add_driver+0xef/0x235
[<ffffffff803ee174>] driver_register+0xa2/0x11f
[<ffffffffa00d2e52>] usb_register_driver+0x7e/0xe0 [usbcore]
[<ffffffffa013001b>] acx_e_init_module+0x1b/0x27 [acx]
[<ffffffff80209041>] _stext+0x41/0x11d
[<ffffffff80265ec9>] sys_init_module+0xa0/0x1ba
[<ffffffff8020c37a>] system_call_fastpath+0x16/0x1b
[<00007f9a426cd74a>] 0x7f9a426cd74a
initializing max packet templates
acx: issue_cmd(cmd:cmd) FAILED
Pid: 4840, comm: modprobe Tainted: G 2.6.27.7-9-default #1
Call Trace:
[<ffffffff8020e42e>] show_trace_log_lvl+0x41/0x58
[<ffffffff804a1e97>] dump_stack+0x69/0x6f
[<ffffffffa0349de9>] acxusb_s_issue_cmd_timeo_debug+0x326/0x361 [acx]
[<ffffffffa033dfa1>] acx_s_init_max_template_generic+0x63/0x6b [acx]
[<ffffffffa033dff3>] acx_s_init_packet_templates+0x4a/0x1ac [acx]
[<ffffffffa034476e>] acx_s_init_mac+0x94/0x7f6 [acx]
[<ffffffffa034a2ce>] acxusb_e_probe+0x4aa/0x6ba [acx]
[<ffffffffa00d2c27>] usb_probe_interface+0x1a8/0x1df [usbcore]
[<ffffffff803eddc3>] really_probe+0xdd/0x1e5
[<ffffffff803edfb0>] __driver_attach+0x46/0x6d
[<ffffffff803ed555>] bus_for_each_dev+0x44/0x78
[<ffffffff803ece3b>] bus_add_driver+0xef/0x235
[<ffffffff803ee174>] driver_register+0xa2/0x11f
[<ffffffffa00d2e52>] usb_register_driver+0x7e/0xe0 [usbcore]
[<ffffffffa013001b>] acx_e_init_module+0x1b/0x27 [acx]
[<ffffffff80209041>] _stext+0x41/0x11d
[<ffffffff80265ec9>] sys_init_module+0xa0/0x1ba
[<ffffffff8020c37a>] system_call_fastpath+0x16/0x1b
[<00007f9a426cd74a>] 0x7f9a426cd74a
wlan%d: acx_s_init_packet_templates() FAILED
acx: init_mac() FAILED
acx_usb: probe of 4-7:1.0 failed with error 1
usbcore: registered new interface driver acx_usb
r8169: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
ip_tables: (C) 2000-2006 Netfilter Core Team
usb 4-7: USB disconnect, address 4
usb 4-7: new high speed USB device using ehci_hcd and address 5
usb 4-7: configuration #1 chosen from 1 choice
scsi8 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usb 4-7: New USB device found, idVendor=057c, idProduct=62ff
usb 4-7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb 4-7: Product: WLAN USB Device
usb 4-7: Manufacturer: AVM GmbH
usb 4-7: SerialNumber: 001C4AF955DD
scsi 8:0:0:0: CD-ROM FRITZ! WLAN selfinstall 1.00 PQ: 0 ANSI: 0 CCS
sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
sr 8:0:0:0: Attached scsi CD-ROM sr1
sr 8:0:0:0: Attached scsi generic sg6 type 5
usb-storage: device scan complete
usb 4-5: reset high speed USB device using ehci_hcd and address 2
usb 4-7: USB disconnect, address 5
scsi 8:0:0:0: rejecting I/O to dead device
scsi 8:0:0:0: rejecting I/O to dead device
scsi 8:0:0:0: rejecting I/O to dead device
usb 4-7: new high speed USB device using ehci_hcd and address 6
usb 4-7: configuration #1 chosen from 1 choice
wait for device ready
requesting firmware image 'tiacx111usbc1B'
firmware: requesting tiacx111usbc1B
acx: firmware image 'tiacx111usbc1B' was not provided. Check your hotplug scripts
acx: issue_cmd(cmd:ACX1xx_CMD_WAKE) FAILED
Pid: 259, comm: khubd Tainted: P 2.6.27.7-9-default #1
Call Trace:
[<ffffffff8020e42e>] show_trace_log_lvl+0x41/0x58
[<ffffffff804a1e97>] dump_stack+0x69/0x6f
[<ffffffffa0349de9>] acxusb_s_issue_cmd_timeo_debug+0x326/0x361 [acx]
[<ffffffffa034a2c6>] acxusb_e_probe+0x4a2/0x6ba [acx]
[<ffffffffa00d2c27>] usb_probe_interface+0x1a8/0x1df [usbcore]
[<ffffffff803eddc3>] really_probe+0xdd/0x1e5
[<ffffffff803ed2aa>] bus_for_each_drv+0x46/0x77
[<ffffffff803ee057>] device_attach+0x58/0x69
[<ffffffff803ed0ba>] bus_attach_device+0x27/0x5d
[<ffffffff803ebb41>] device_add+0x2d7/0x472
[<ffffffffa00d1bd3>] usb_set_configuration+0x4ef/0x556 [usbcore]
[<ffffffffa00d8f52>] generic_probe+0x4b/0x8d [usbcore]
[<ffffffff803eddc3>] really_probe+0xdd/0x1e5
[<ffffffff803ed2aa>] bus_for_each_drv+0x46/0x77
[<ffffffff803ee057>] device_attach+0x58/0x69
[<ffffffff803ed0ba>] bus_attach_device+0x27/0x5d
[<ffffffff803ebb41>] device_add+0x2d7/0x472
[<ffffffffa00cb73e>] usb_new_device+0x55/0xa2 [usbcore]
[<ffffffffa00cc416>] hub_port_connect_change+0x609/0x8ed [usbcore]
[<ffffffffa00ccdcd>] hub_events+0x6d3/0x8d0 [usbcore]
[<ffffffffa00ccff8>] hub_thread+0x2e/0x1a0 [usbcore]
[<ffffffff8025434d>] kthread+0x47/0x73
[<ffffffff8020d7b9>] child_rip+0xa/0x11
initializing max packet templates
acx: issue_cmd(cmd:cmd) FAILED
Pid: 259, comm: khubd Tainted: P 2.6.27.7-9-default #1
Call Trace:
[<ffffffff8020e42e>] show_trace_log_lvl+0x41/0x58
[<ffffffff804a1e97>] dump_stack+0x69/0x6f
[<ffffffffa0349de9>] acxusb_s_issue_cmd_timeo_debug+0x326/0x361 [acx]
[<ffffffffa033dfa1>] acx_s_init_max_template_generic+0x63/0x6b [acx]
[<ffffffffa033dff3>] acx_s_init_packet_templates+0x4a/0x1ac [acx]
[<ffffffffa034476e>] acx_s_init_mac+0x94/0x7f6 [acx]
[<ffffffffa034a2ce>] acxusb_e_probe+0x4aa/0x6ba [acx]
[<ffffffffa00d2c27>] usb_probe_interface+0x1a8/0x1df [usbcore]
[<ffffffff803eddc3>] really_probe+0xdd/0x1e5
[<ffffffff803ed2aa>] bus_for_each_drv+0x46/0x77
[<ffffffff803ee057>] device_attach+0x58/0x69
[<ffffffff803ed0ba>] bus_attach_device+0x27/0x5d
[<ffffffff803ebb41>] device_add+0x2d7/0x472
[<ffffffffa00d1bd3>] usb_set_configuration+0x4ef/0x556 [usbcore]
[<ffffffffa00d8f52>] generic_probe+0x4b/0x8d [usbcore]
[<ffffffff803eddc3>] really_probe+0xdd/0x1e5
[<ffffffff803ed2aa>] bus_for_each_drv+0x46/0x77
[<ffffffff803ee057>] device_attach+0x58/0x69
[<ffffffff803ed0ba>] bus_attach_device+0x27/0x5d
[<ffffffff803ebb41>] device_add+0x2d7/0x472
[<ffffffffa00cb73e>] usb_new_device+0x55/0xa2 [usbcore]
[<ffffffffa00cc416>] hub_port_connect_change+0x609/0x8ed [usbcore]
[<ffffffffa00ccdcd>] hub_events+0x6d3/0x8d0 [usbcore]
[<ffffffffa00ccff8>] hub_thread+0x2e/0x1a0 [usbcore]
[<ffffffff8025434d>] kthread+0x47/0x73
[<ffffffff8020d7b9>] child_rip+0xa/0x11
wlan%d: acx_s_init_packet_templates() FAILED
acx: init_mac() FAILED
acx_usb: probe of 4-7:1.0 failed with error 1
usb 4-7: New USB device found, idVendor=057c, idProduct=6201
usb 4-7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb 4-7: Product: WLAN USB Device
usb 4-7: Manufacturer: AVM GmbH
usb 4-7: SerialNumber: 001C4AF955DD
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
was soll ich nun machen wie gesagt bei mir funktioniert auch nur die 64 Bit Version
jetz habe ich noch einige Daten über meinen Rechner und den Kernel:
CPU-Informationen
Prozessor (CPU): Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
Geschwindigkeit: 1,600.00 MHz
Kerne: 4
Betriebssystem
Betriebssystem: Linux 2.6.27.7-9-default x86_64
Aktueller Benutzer: nicole@linux-4865
System: openSUSE 11.1 (x86_64)
KDE: 3.5.10 "release 21.11"
Graphikkarte
Hersteller: ATI Technologies Inc
Modell: ATI Radeon HD 3670
Treiber: radeonhd (3D-Unterstützung)
Ich hoffe ihr könnt mir weiterhelfen Vielen Dank schonmal im Voraus
