**** dunkel update durchgeführt

[mgc1000]

Hallo

Ich bin neu auf diesem Gebiet und brauche eure Hilfe.
ich habe eine KabelBox sagem mit GLJ Image Online update habe ich gemacht ,aber es bleibt dunkel.

Kann mir jemand helfen?

Log:

Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0040

will verify ELF image, start= 0x800000, size= 149536
verify sig: 262
Branching to 0x40000


U-Boot 1.1.4 (Tuxbox) (Jul 26 2006 - 05:58:23)

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ........... done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (jffs2) loading 'vmlinuz' to 0x100000
### FS load complete: 650877 bytes loaded to 0x100000
.................................................. .............
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 650813 Bytes = 635.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.34-dbox2 (GLJ-Team@DBOX2) (gcc version 3.4.4) #4 Sa Apr 21 21:
03:42 CEST 2007
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 rw rootfstype=jffs2
Decrementer Frequency = 247500000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30864k available (1104k kernel code, 340k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:3b:0b:7d
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Creating 5 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x007840f8: 0x0100 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00784118: 0x4100 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0078411c: 0x0100 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00784120: 0x0001 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0078412c: 0x0040 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00784144: 0x0114 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00784148: 0x0004 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0078414c: 0x0050 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00784160: 0x0014 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00784164: 0x4500 in
stead
Further such events for this erase block will not be printed
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.2.1 (2007.03.23-16:52+0000) multi-call Chip reports vo
ltage low on erase: status 0xa8
Erase at 0x00780000 failed immediately: errno -5
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Detected STB:
Vendor: Sagem
Model: D-BOX2
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
cam.c,v 1.31 13th of May satsuse
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter - GLJ-Team (JohnDoe,g5401) (C-Cube AViA GTX/eNX wit
h AViA 500/600).
DVB: registering frontend - http://glj.6x.to 0:0 (Atmel AT76C651A with TUA6010XS
)...
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_av_core: Starting avia_gt_wdt thread.
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
avia_gt_proc: Using config file '/var/tuxbox/config/avia.conf'.


avia_gt_proc: $Id: avia_gt_proc.c,v 0.92d 2003/06/18 19:00:00 bofh Exp $

avia_gt_proc: found - AVIA eNX

Please press Enter to activate this console. rm: cannot remove `/var/etc/.slot0_
start': No such file or directory
rm: cannot remove `/var/etc/.slot1_start': No such file or directory
rm: cannot remove `/var/etc/.slot_com': No such file or directory
rm: cannot remove `/var/etc/.slot_multi': No such file or directory
rm: cannot remove `/var/etc/.com_betad': No such file or directory
rm: cannot remove `/var/etc/.multi_betad': No such file or directory
[CBasicClient] connect failed.
/tmp/sectionsd.sock: No such file or directory
$Id: zapit.cpp,v 1.395 2007/03/17 21:34:22 houdini, patched by GLJ-Team (JohnDoe
) Exp $
[zapit] PMT update enabled
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
/tmp/currentservices.xml: No such file or directory
$Id: controld.cpp,v 1.124 2006/06/27 10:21:59 barf Exp $

[controld] Boxtype detected: (3, Sagem D-BOX2)
[controld]: ROUTEVIDEO v1 = 0 a1 = 0 v2 = 0 a2 = 0 fblk=1
[CBasicClient] connect failed.
/tmp/sectionsd.sock: No such file or directory
cam.c,v 1.31 13th of May satsuse
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Camd3 Multicam-Treiber nicht geladen
Starte camd3
[CBasicClient] connect failed.
/tmp/sectionsd.sock: No such file or directory
03.12.1951 21:02:53 camd3: BOXTYPE: 1
03.12.1951 21:02:53 camd3: LOG: 6
03.12.1951 21:02:53 camd3: UDP_PORT: 8899
03.12.1951 21:02:53 camd3: original slot au on
03.12.1951 21:02:53 camd3: TCP_PORT: 20248
03.12.1951 21:02:53 camd3: HTTP_PORT: 9080
03.12.1951 21:02:53 camd3: LOG_HOST: 127.0.0.1:514
03.12.1951 21:02:53 camd3: DNS_CACHE: 600 sec
03.12.1951 21:02:53 camd3: SOCKET: /tmp/camd.sock01
03.12.1951 21:02:53 camd3: KEYS: /var/keys/camd3.keys
03.12.1951 21:02:53 camd3: SERVERS: /var/keys/camd3.servers
03.12.1951 21:02:53 camd3: USERS: /var/keys/camd3.users
03.12.1951 21:02:53 camd3: /var/keys/camd3.servers No such file or directory
03.12.1951 21:02:54 camd3: original slot: CAID=1722

03.12.1951 21:02:54 camd3: /var/keys/camd3.users No such file or directory
03.12.1951 21:02:54 camd3: error parse line #152 in /var/keys/camd3.keys
03.12.1951 21:02:54 camd3: error parse line #156 in /var/keys/camd3.keys
03.12.1951 21:02:54 camd3: KeyDB: gestartet
03.12.1951 21:02:54 camd3: HTTP: started on port 9080
03.12.1951 21:02:54 camd3: camd v3.868 - erfolgreich gestartet
03.12.1951 21:02:55 camd3: original slot: CoCo=

03.12.1951 21:02:55 camd3: original slot Serial=

03.12.1951 21:02:55 camd3: original slot Version=ffff

[nhttpd] Neutrino HTTP-Server starting......Patched GLJ-Team (JohnDoe)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...[CBasicClient] connect failed.

/tmp/sectionsd.sock: No such file or directory
OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
$Id: sectionsd.cpp,v 1.237 2007/03/29 15:43:32 mws Exp $
[sectionsd] Caching max 2500 events
[sectionsd] Caching 1 days
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/mybouquets.xml: No such file or directory
/tmp/neutrino: /lib/libpng12.so.0: no version information available (required by
/tmp/neutrino)
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[deutsch.locale] superfluous entry: flashupdate.currentdistribution
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] registering as event client
[neutrino] initialized everything
PES, queue 0 normal.
[CBasicClient] connect failed.
/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed.
03.12.1951 21:03:08 camd3: start ECM: caid 1801 pid 16a0 prv 000000 srv 00a8
/tmp/camd.sock02: No such file or directory
03.12.1951 21:03:08 camd3: IPC 02 -> 1801:000501:00A8:16A0 0.022824s
[CBasicClient] connect failed.
/tmp/camd.sock03: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock04: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock05: No such file or directory
[timeThread] - 24.08.2007 12:04:39, tim: Fri Aug 24 12:04:39 2007
[timeThread] Time set via DVB, going to sleep for 1800 seconds.
24.08.2007 12:04:43 camd3: start EMM: caid 1801 pid 1001 prv 000000 srv 00a8
24.08.2007 12:04:51 camd3: IPC 02 -> 1801:000501:00A8:16A0 0.019764s
24.08.2007 12:05:05 camd3: IPC 02 -> 1801:000501:00A8:16A0 0.017478s
24.08.2007 12:05:19 camd3: IPC 02 -> 1801:000501:00A8:16A0 0.018970s
24.08.2007 12:05:34 camd3: IPC 02 -> 1801:000501:00A8:16A0 0.019228s
24.08.2007 12:05:48 camd3: IPC 02 -> 1801:000501:00A8:16A0 0.019458s
24.08.2007 12:06:02 camd3: IPC 02 -> 1801:000501:00A8:16A0 0.017389s
24.08.2007 12:06:16 camd3: IPC 02 -> 1801:000501:00A8:16A0 0.022171s
24.08.2007 12:06:30 camd3: IPC 02 -> 1801:000501:00A8:16A0 0.019040s
24.08.2007 12:06:44 camd3: IPC 02 -> 1801:000501:00A8:16A0 0.018966s
24.08.200



mFg

mgc

[LeChuck]

DU brauchst einen emu, z.B camd3 und die richtigen kekse dafür, dann klappts auch mit dem nachbarn

[mgc1000]

Camd3 hab ich doch oder?
woher die pssende Kekse ?
wie gesagt bin neu

[LeChuck]

schau mal bei google nach
nachtfalke oder keywelt da wird dir geholfen, da gibt es alles