Linux Befehle

[h4xxxx0r]

Hi,
Hier habe ich mal ein paar Befehle rein geschrieben.

sudo apt-get install (Name)
Beschreibung: Mit diesem Code kannst du Programme einfach so installieren ohne zu Google.

sudo apt-get update
Beschreibung: Einfach mal ein Update von der Ubuntu Version.

sudo apt-get upgrade
Beschreibung: Einfach mal ein Upgrade machen.

Wenn was fehlt einfach posten.

MfG

[LuLu-X]

In welchem Zusammenhang sollten welche Fehlen? xD Schau dir allein mal "man apt-get" an da haste schon deine ganzen varriationen allein von dem Programm ;-) . Linux Befehlslisten gibts massig bei google...
btw: update -> Quellen des Paketmanagers neu suchen. Also dessen Liste aktualisieren.
upgrade -> das typische Softwareupdate. läd also alle neuen Pakete die du mit update gefunden hast herunter und installiert sie

[0x29a]

Hehe, da fehlen doch zig Befehle

Außerdem sind das keine "Linux" - Befehle direkt!

Die lauten mit dem RPM z.B. ganz anders..

FG

[noctem]

Das sind keine Linuxbefehle sondern einfach das Programm apt-get mit verschiedenen Parametern.
:roll:

[sharky.sharky]

sudo ist doch soweit ich weiß nur bei ubuntu, xbuntu etc nötig, da du bei denen normal keine root hast außer du schaltest ihne frei

[0x29a]

jo genau sind nur ein paar (3 ^^) befehle für apt-get (paketmanager).

wenn du "linux-befehle" posten willst, hier bitte: Linux auf einem Blatt

[FreeAccZ]

jo genau sind nur ein paar (3 ^^) befehle für apt-get (paketmanager).

wenn du "linux-befehle" posten willst, hier bitte: Linux auf einem Blatt

hex29a Danke dir, genau das habe ich gesucht!

Dumme frage aber, hast du evt. noch mehr davon?

[0x29a]

mmh, z.b. sowas?

Befehle

(oder alphabetisch ^^)

Befehle2

[-[RiDER]-]

Hi
Diese sehr schön ausführliche Linuxreferenz hat mich so begeistert, dass ich hier dazu meinen Saft ablassen muss!

Zum Ersten: "sudo" ist ein total normaler Linux-Befehl, nichts Distributionsspezifisches - siehe "man 8 sudo".

Zum Zweiten: Die oben aufgeführten Befehle sind Distributionsspezifisch. "apt-get" ist unter Debian-Systemen, wie Ubuntu gängig.

Zuletzt: Wie vom OP gewünscht, die Befehle, die (im Zusammenhang mit apt-get) noch fehlen:

Name
apt-get - APT package handling utility -- command-line interface
Synopsis

apt-get [ -hvs ] [ -o=config string ] [ -c=file ] { update | upgrade | dselect-upgrade | install pkg ... | remove pkg ... | source pkg ... | build-dep pkg ... | check | clean | autoclean }
Description

apt-get is the command-line tool for handling packages, and may be considered the user's "back-end" to other tools using the APT library. Several "front-end" interfaces exist, such as dselect(8), aptitude, synaptic, gnome-apt and wajig.

Unless the -h, or --help option is given, one of the commands below must be present.

update
    update is used to resynchronize the package index files from their sources. The indexes of available packages are fetched from the location(s) specified in /etc/apt/sources.list. For example, when using a Debian archive, this command retrieves and scans the Packages.gz files, so that information about new and updated packages is available. An update should always be performed before an upgrade or dist-upgrade. Please be aware that the overall progress meter will be incorrect as the size of the package files cannot be known in advance. 
upgrade
    upgrade is used to install the newest versions of all packages currently installed on the system from the sources enumerated in /etc/apt/sources.list. Packages currently installed with new versions available are retrieved and upgraded; under no circumstances are currently installed packages removed, or packages not already installed retrieved and installed. New versions of currently installed packages that cannot be upgraded without changing the install status of another package will be left at their current version. An update must be performed first so that apt-get knows that new versions of packages are available. 
dselect-upgrade
    dselect-upgrade is used in conjunction with the traditional Debian packaging front-end, dselect(8). dselect-upgrade follows the changes made by dselect(8) to the Status field of available packages, and performs the actions necessary to realize that state (for instance, the removal of old and the installation of new packages). 
dist-upgrade
    dist-upgrade, in addition to performing the function of upgrade, also intelligently handles changing dependencies with new versions of packages; apt-get has a "smart" conflict resolution system, and it will attempt to upgrade the most important packages at the expense of less important ones if necessary. The /etc/apt/sources.list file contains a list of locations from which to retrieve desired package files. See also apt_preferences(5) for a mechanism for overriding the general settings for individual packages. 
install
    install is followed by one or more packages desired for installation. Each package is a package name, not a fully qualified filename (for instance, in a Debian GNU/Linux system, libc6 would be the argument provided, not libc6_1.9.6-2.deb). All packages required by the package(s) specified for installation will also be retrieved and installed. The /etc/apt/sources.list file is used to locate the desired packages. If a hyphen is appended to the package name (with no intervening space), the identified package will be removed if it is installed. Similarly a plus sign can be used to designate a package to install. These latter features may be used to override decisions made by apt-get's conflict resolution system.

    A specific version of a package can be selected for installation by following the package name with an equals and the version of the package to select. This will cause that version to be located and selected for install. Alternatively a specific distribution can be selected by following the package name with a slash and the version of the distribution or the Archive name (stable, testing, unstable).

    Both of the version selection mechanisms can downgrade packages and must be used with care.

    Finally, the apt_preferences(5) mechanism allows you to create an alternative installation policy for individual packages.

    If no package matches the given expression and the expression contains one of '.', '?' or '*' then it is assumed to be a POSIX regular expression, and it is applied to all package names in the database. Any matches are then installed (or removed). Note that matching is done by substring so 'lo.*' matches 'how-lo' and 'lowest'. If this is undesired, anchor the regular expression with a '^' or '$' character, or create a more specific regular expression. 
remove
    remove is identical to install except that packages are removed instead of installed. If a plus sign is appended to the package name (with no intervening space), the identified package will be installed instead of removed. 
source
    source causes apt-get to fetch source packages. APT will examine the available packages to decide which source package to fetch. It will then find and download into the current directory the newest available version of that source package. Source packages are tracked separately from binary packages via deb-src type lines in the sources.list(5) file. This probably will mean that you will not get the same source as the package you have installed or as you could install. If the --compile options is specified then the package will be compiled to a binary .deb using dpkg-buildpackage, if --download-only is specified then the source package will not be unpacked.

    A specific source version can be retrieved by postfixing the source name with an equals and then the version to fetch, similar to the mechanism used for the package files. This enables exact matching of the source package name and version, implicitly enabling the APT::Get::Only-Source option.

    Note that source packages are not tracked like binary packages, they exist only in the current directory and are similar to downloading source tar balls. 
build-dep
    build-dep causes apt-get to install/remove packages in an attempt to satisfy the build dependencies for a source package. 
check
    check is a diagnostic tool; it updates the package cache and checks for broken dependencies. 
clean
    clean clears out the local repository of retrieved package files. It removes everything but the lock file from /var/cache/apt/archives/ and /var/cache/apt/archives/partial/. When APT is used as a dselect(8) method, clean is run automatically. Those who do not use dselect will likely want to run apt-get clean from time to time to free up disk space. 
autoclean
    Like clean, autoclean clears out the local repository of retrieved package files. The difference is that it only removes package files that can no longer be downloaded, and are largely useless. This allows a cache to be maintained over a long period without it growing out of control. The configuration option APT::Clean-Installed will prevent installed packages from being erased if it is set to off.

Options

All command line options may be set using the configuration file, the descriptions indicate the configuration option to set. For boolean options you can override the config file by using something like -f-,--no-f, -f=no or several other variations.

-d
--download-only
    Download only; package files are only retrieved, not unpacked or installed. Configuration Item: APT::Get::Download-Only. 
-f
--fix-broken
    Fix; attempt to correct a system with broken dependencies in place. This option, when used with install/remove, can omit any packages to permit APT to deduce a likely solution. Any Package that are specified must completely correct the problem. The option is sometimes necessary when running APT for the first time; APT itself does not allow broken package dependencies to exist on a system. It is possible that a system's dependency structure can be so corrupt as to require manual intervention (which usually means using dselect(8) or dpkg --remove to eliminate some of the offending packages). Use of this option together with -m may produce an error in some situations. Configuration Item: APT::Get::Fix-Broken. 
-m
--ignore-missing
--fix-missing
    Ignore missing packages; If packages cannot be retrieved or fail the integrity check after retrieval (corrupted package files), hold back those packages and handle the result. Use of this option together with -f may produce an error in some situations. If a package is selected for installation (particularly if it is mentioned on the command line) and it could not be downloaded then it will be silently held back. Configuration Item: APT::Get::Fix-Missing. 
--no-download
    Disables downloading of packages. This is best used with --ignore-missing to force APT to use only the .debs it has already downloaded. Configuration Item: APT::Get::Download. 
-q
--quiet
    Quiet; produces output suitable for logging, omitting progress indicators. More q's will produce more quiet up to a maximum of 2. You can also use -q=# to set the quiet level, overriding the configuration file. Note that quiet level 2 implies -y, you should never use -qq without a no-action modifier such as -d, --print-uris or -s as APT may decided to do something you did not expect. Configuration Item: quiet. 
-s
--simulate
--just-print
--dry-run
--recon
--no-act
    No action; perform a simulation of events that would occur but do not actually change the system. Configuration Item: APT::Get::Simulate.

    Simulate prints out a series of lines each one representing a dpkg operation, Configure (Conf), Remove (Remv), Unpack (Inst). Square brackets indicate broken packages with and empty set of square brackets meaning breaks that are of no consequence (rare). 
-y
--yes
--assume-yes
    Automatic yes to prompts; assume "yes" as answer to all prompts and run non-interactively. If an undesirable situation, such as changing a held package or removing an essential package occurs then apt-get will abort. Configuration Item: APT::Get::Assume-Yes. 
-u
--show-upgraded
    Show upgraded packages; Print out a list of all packages that are to be upgraded. Configuration Item: APT::Get::Show-Upgraded. 
-V
--verbose-versions
    Show full versions for upgraded and installed packages. Configuration Item: APT::Get::Show-Versions. 
-b
--compile
--build
    Compile source packages after downloading them. Configuration Item: APT::Get::Compile. 
--ignore-hold
    Ignore package Holds; This causes apt-get to ignore a hold placed on a package. This may be useful in conjunction with dist-upgrade to override a large number of undesired holds. Configuration Item: APT::Ignore-Hold. 
--no-upgrade
    Do not upgrade packages; When used in conjunction with install no-upgrade will prevent packages listed from being upgraded if they are already installed. Configuration Item: APT::Get::Upgrade. 
--force-yes
    Force yes; This is a dangerous option that will cause apt to continue without prompting if it is doing something potentially harmful. It should not be used except in very special situations. Using force-yes can potentially destroy your system! Configuration Item: APT::Get::force-yes. 
--print-uris
    Instead of fetching the files to install their URIs are printed. Each URI will have the path, the destination file name, the size and the expected md5 hash. Note that the file name to write to will not always match the file name on the remote site! This also works with the source and update commands. When used with the update command the MD5 and size are not included, and it is up to the user to decompress any compressed files. Configuration Item: APT::Get::Print-URIs. 
--purge
    Use purge instead of remove for anything that would be removed. An asterisk ("*") will be displayed next to packages which are scheduled to be purged. Configuration Item: APT::Get::Purge. 
--reinstall
    Re-Install packages that are already installed and at the newest version. Configuration Item: APT::Get::ReInstall. 
--list-cleanup
    This option defaults to on, use --no-list-cleanup to turn it off. When on apt-get will automatically manage the contents of /var/lib/apt/lists to ensure that obsolete files are erased. The only reason to turn it off is if you frequently change your source list. Configuration Item: APT::Get::List-Cleanup. 
-t
--target-release
--default-release
    This option controls the default input to the policy engine, it creates a default pin at priority 990 using the specified release string. The preferences file may further override this setting. In short, this option lets you have simple control over which distribution packages will be retrieved from. Some common examples might be -t '2.1*' or -t unstable. Configuration Item: APT::Default-Release; see also the apt_preferences(5) manual page. 
--trivial-only
    Only perform operations that are 'trivial'. Logically this can be considered related to --assume-yes, where --assume-yes will answer yes to any prompt, --trivial-only will answer no. Configuration Item: APT::Get::Trivial-Only. 
--no-remove
    If any packages are to be removed apt-get immediately aborts without prompting. Configuration Item: APT::Get::Remove 
--only-source
    Only has meaning for the source command. Indicates that the given source names are not to be mapped through the binary table. This means that if this option is specified, the source command will only accept source package names as arguments, rather than accepting binary package names and looking up the corresponding source package. Configuration Item: APT::Get::Only-Source 
--diff-only
--tar-only
    Download only the diff or tar file of a source archive. Configuration Item: APT::Get::Diff-Only and APT::Get::Tar-Only 
--arch-only
    Only process architecture-dependent build-dependencies. Configuration Item: APT::Get::Arch-Only 
-h
--help
    Show a short usage summary. 
-v
--version
    Show the program version. 
-c
--config-file
    Configuration File; Specify a configuration file to use. The program will read the default configuration file and then this configuration file. See apt.conf(5) for syntax information. 
-o
--option
    Set a Configuration Option; This will set an arbitrary configuration option. The syntax is -o Foo::Bar=bar.

Files

/etc/apt/sources.list
    Locations to fetch packages from. Configuration Item: Dir::Etc::SourceList. 
/etc/apt/apt.conf
    APT configuration file. Configuration Item: Dir::Etc::Main. 
/etc/apt/apt.conf.d/
    APT configuration file fragments Configuration Item: Dir::Etc::Parts. 
/etc/apt/preferences
    Version preferences file. This is where you would specify "pinning", i.e. a preference to get certain packages from a separate source or from a different version of a distribution. Configuration Item: Dir::Etc::Preferences. 
/var/cache/apt/archives/
    Storage area for retrieved package files. Configuration Item: Dir::Cache::Archives. 
/var/cache/apt/archives/partial/
    Storage area for package files in transit. Configuration Item: Dir::Cache::Archives (implicit partial). 
/var/lib/apt/lists/
    Storage area for state information for each package resource specified in sources.list(5) Configuration Item: Dir::State::Lists. 
/var/lib/apt/lists/partial/
    Storage area for state information in transit. Configuration Item: Dir::State::Lists (implicit partial).

Warum kauft sich der OP nicht mal ein Buch über Linux, um zu sehen, dass es das umfangreichste OS ist, dass mal auf dem Planeten finden wird und nicht nur auf drei Befehle (mit denen sich noch nichtmal der Computer an- bzw. ausschalten ließe) beschränkt ist?

GreetZ RiDER

[GrafZeppelin]

@h4xxxx0r

Bitte entferne den TUX aus deinem Avatar, und bitte benutze nie wieder Linux!

schon echt krass was du so als "Linux Befehle" bezeichnest!